Flow Meters are reliable flow measuring instruments
manufactured with the highest quality standards. Each meter
is standard with a gallon totalizer or an optional digital rate of
flow register. The baked, powder-coated epoxy surface resists
corrosive conditions and large open water passages produces
low headloss. A full range of sizes for any application. |
- For wastewater, agricultural, landscape and industrial applications.
|
Maximum working pressure:
- 3/4” to 1 1/2” - 145 psi
2” to 12” - 230 psi
Maximum water temperature:
- 3/4” to 1 1/2” - 120° F
2” to 12” - 140° F
Body Material:
- 3/4” - Polypropylene
1”, 1 1/2” - Corrosion proof copper alloy
2” to 12” - Cast iron
- 1” to 12” meters are painted with baked, powder-coated epoxy for resistance to corrosive conditions.
Installation requirement:
- 2” to 12” - 10 x diameter before and x 5 after for maximum accuracy
- 3/4” to 1” - no straight pipe requirement
|
- 3/4”, 1” and 1 1/2” M Flow Meters
- Only one moving part (impeller) in contact with water for minimum wear and utmost reliability.
- Same register design as larger meters.
- Precision quality at economical prices.
- Installs horizontally.
- High accuracy down to 5 GPM.
- Threaded couplers for easy installation and removal.
- Can be installed in a vertical, horizontal, or oblique position.
- 3”, 4”, 6” and 8” IRT Flow Meters
- Specifically designed for wastewater applications.
- Measuring accuracy is +/-2%.
- Open water passage resulting in very low headloss.
- High resistance to fine sand damage.
- Most economical price in the industry.
- Can be installed in a vertical, horizontal, or oblique position.
- 3", 4", 6", 8", 10” and 12” WT Flow Meters
- Highest quality and reliability available.
- Double magnetic drive register.
- Low wear, long-life impeller shaft and bearings.
- Maximum protection from fine sand damage.
- Full diameter impeller.
- Can be installed in a vertical, horizontal, or oblique position.
|
|
- Magnetic drive
- Hermetically sealed capsule
- Cartridge design for easy field
replacement
- Output fitting for electronic sensor
- 6-Digit totalizer
- 3-Flow Indicator dials
- Leak detector
|
|
About Netafim USA 
