HydroMeters provide superior hydraulic performance and reliable flow measuring. A single unit - combination of water meter and hydraulic valve - saves space and installation costs. Standard with magnetic drive register and optional pulse reed switch for pulsed output. Available in sizes 1 1/2” to 8” with Angle or Globe configurations.
|
- Remote control systems for wastewater, agriculture and industrial applications.
- Master Valve.
- Automated operations.
- Optional Functions: Pressure Reducing, Pressure Sustaining, Electric, and Remote Control
|
Maximum working pressure: 228 psi
Minimum working pressure: 14 psi
Available sizes: 1 1/2”, 2”, 3”, 4”, 6”, and 8”
Inlet/outlet connections:
- 1 1/2” - male threaded coupler
2” Globe - female 2” thread
2” Angle - male threaded coupler
3” to 8” - flange, ANSI/AWWA
Body material: cast iron, baked powder-coated for resistance to corrosive conditions.
Valve diaphragm: reinforced natural rubber |
- Combination water meter and hydraulic valve in one unit.
- Most accurate flow meter in the industry - an accuracy of +/-2% at very low flow rates.
- Single unit saves space and installation costs.
- Variety of sizes suitable for virtually any application.
- Available in Globe or Angle configurations.
- Magnetic drive register is standard feature.
- All valves are double chambered and specially designed for high pressure operation.
- Addition of pilot or solenoid valves enables remote and/or automatic hydraulic commands.
- Optional pulse reed switch for pulsed output.
|
|
- Magnetic drive
- Hermetically sealed capsule
- Cartridge design for easy field replacement
- Output fitting for electronic sensor
- 6-Digit totalizer
- 3-Flow Indicator dials
|
Notes:
Globe HydroMeters do not require minimum pipe diameters before and after the meter to achieve high accuracy.
Angle HydroMeters require 5 pipe diameters before the meter and 2 pipe diameters after the meter to achieve high accuracy. |
|
About Netafim USA 
